Suction intake valve KPV-100, KPV-150, KPV-200, KPV -250, KPV-300, KPV-350
The suction valve is designed to allow the direct flow of working fluid through the pipeline and prevent its reverse flow. It is installed on the suction pipeline.
The inlet valve is designed for operation for regions with a moderate climate and is manufactured in UHL category 5 according to GOST 15150-69.
Specification
| Parameter | Value |
|---|---|
| Working fluid | clarified mine water |
| Working fluid temperature | from +1 to +50 C |
| Aqueous indicator, pH | 5.5 - 8 |
| Kinematic viscosity of the working fluid m2/s | no more than 0.5 |
| Recommended filtration fineness of the working fluid, mm | no more than 0.2 |
| Working pressure at the inlet, MPa (kg/cm2) | no more than 0,25 (2,5) |
| Nominal passage, mm | 300 |
| Mass, kg | no more than 39 |
| Overall dimensions, mm | no more than 370×445 |